Electric-eel RF Manuel d'utilisateur télécharger pdf (Page 5)

Model RF Manual (082610)_2-ColorREV.doc Page 5 of 16

7. Only use 14/3 or larger three-

wire extension cords with three-

prong grounding plugs and

three-pole receptacles.

8. When using an extension cord

outdoors, only use those

intended for outdoor use.

(Indicated on cord by suffix

“W-A” after cord type.)

THE GROUND FAULT CIRCUIT

INTERRUPTER

(GFCI)

This machine is equipped with a

Ground Fault Circuit Interrupter (GFCI)

which is designed to prevent a serious

electrical shock. This device should be

tested on the jobsite before putting

the machine into operation as follows:

1. To ensure protection against

electric shock, test the device

before each use. When test

button is pushed in, the indicator

light should go off. Reactivate

the device by pushing the reset

button in. If the indicator light

goes on, the device is ready for

use. DO NOT use the device if

the indicator light does not go on

when reset or if the indicator

light remains on, when the test

button is pushed in.

2. This device does not guard

against electric shock resulting

from defects or faults in any

wiring supplying power to this

device, or from contact with both

circuit conductors.

GENERAL SAFETY –

ROTATING CABLES AND

EQUIPMENT

DANGER

TO PREVENT SERIOUS BODILY

INJURY AND TO AVOID DANGER

FROM ROTATING CABLES AND

EQUIPMENT:

1. USE CAUTION AT ALL TIMES.

Cable can twist or kink and

cause serious injury. Fingers or

other body parts can be caught

in rotating parts.

2. NEVER handle the rotating

cable.

3. NEVER handle any cable

under tension. Relieve all

tension build up before

attempting to handle cable.

4. NEVER operate machine without

cable guide spring in place.

5. Use feeder to advance or retract

cable with motor switch in

FORWARD position for ALL

cleaning operations. Use

REVERSE motor position ONLY

to dislodge tool lodged in

pipeline and/or to relieve

unnecessary build-up of torque

on a cable.

6.

DO NOT continue to operate

machine when cleaning tool

becomes stuck in obstruction.

Excess torque on a cable

could cause it to fracture.

1 2 3 4 5 6 7 8 9 10 ... 15 16

Commentaires sur ces manuels

Pas de commentaire